Contact Us

Tel: +86-510-83291139

Fax: +86-510-83273338

Mob: +86-15852736128

E-mail: export_changyi@126.com

Add: Hengxin Road No.5, Qianqiao Hengyuanxiang Industrial Park, Wuxi City, Jiangsu

Home > Exhibition > Content
For the internal surface roughness and galling, what should be paid attention to during trimming wheel? May 24, 2017


Attention must be paid to the accurate selection of grinding wheels and trimming wheels.

In the process of internal grinding, the machining quality is affected by small grinding wheel and long grinding rod. In order to facilitate the smooth surface of the inner hole, the following two points should be paid attention to when trimming the grinding wheel:

1) the diamond tip must be sharp, in order to trim the smooth and multi edged abrasive particles, so that the cutting is brisk and the surface roughness of the grinding surface is reduced.

M250A performance Stepped hole   internal grinding machine.jpg

2) if the cylindrical grinder is used to grind the inner hole, the height of the grinding wheel dresser center shall be as the standard of the cylindrical grinding wheel center, and it is 1 to 2 mm lower than the center. Among the use of the internal grinding, because of its rotation direction is opposite to the direction of the cylindrical grinding wheel head, therefore, must take the diamond knife 1 to 2mm higher than the Center, so as to maintain the stability in the trimming, avoid eating knife phenomenon, and it is also beneficial to the smoothness of the wheel rim, improve the accuracy and reduce the surface roughness.

If you are interested in our products, or would like to join us, welcome to contact us.

 WUXI CHANGYI MACHINE TOOLS CO.,LTD.

 Add: Hengxin Road No.5, Qianqiao Hengyuanxiang Industrial Park, Wuxi City, Jiangsu

 Contact: Ms.zeng

 Mobile: +86-15852736128/13506159949

Tel: +86-510-83291139

Fax: +86-510-83273338

E-mail: export_changyi@126.com

Web:http://www.changyigrinder.com/

.