Contact Us

Tel: +86-510-83291139

Fax: +86-510-83273338

Mob: +86-15852736128

E-mail: export_changyi@126.com

Add: Hengxin Road No.5, Qianqiao Hengyuanxiang Industrial Park, Wuxi City, Jiangsu

Home > Exhibition > Content
What cousing the inner bore is tapered after internal grinding? May 26, 2017


This defect is shown in figure 5-52, mainly in case of center line of the vertical grinder headstock shaft is not parallel to the worktable longitudinal direction or the axis center line of the grinding wheel is not parallel with the work table feed direction in the vertical plane. At this time, the grinder should be adjusted or repaired.

QQ图片20170526082431.png

During the batch grinding, if the taper holes appeared in midway, at this time, do not blindly adjust the grinder,because the grinding wheel dull or grinding block, can all cause the wall thickness of the work piece holes difference become too large, and the difference of thermal expansion also results in to the taper hole. Therefore, measures should be taken after finding out the reasons.

If you are interested in our products, or would like to join us, welcome to contact us.
WUXI CHANGYI MACHINE TOOLS CO.,LTD.
Add: Hengxin Road No.5, Qianqiao Hengyuanxiang Industrial Park, Wuxi City, Jiangsu
Contact: Ms.zeng
Mobile: +86-15852736128/13506159949
Tel: +86-510-83291139
Fax: +86-510-83273338
E-mail: export_changyi@126.com
Web:http://www.changyigrinder.com/