Contact Us

Tel: +86-510-83291139

Fax: +86-510-83273338

Mob: +86-15852736128

E-mail: export_changyi@126.com

Add: Hengxin Road No.5, Qianqiao Hengyuanxiang Industrial Park, Wuxi City, Jiangsu

Home > Product > buy General end face Internal grinder

buy General end face Internal grinder

  • Model MK1632 Internal and External composite grinding machine / Internal and cylindrical and surface grinders with low energy consumption and endurable

    Model MK1632 Internal and External composite grinding machine / Internal and cylindrical and surface grinders with low energy consumption and endurableSpindle and spindle clearance can rotate to adjust the scale set 3, rotate clockwise the increase of the gap, the gap between the counter decreases, when the dead center of grinding, the gap is reduced to zero, which will lock the spindle, when the spindle rotates to the spindle and bearing to a certain gap, the gap in general (radius) 0.005mm. The scale of the scale set means that the clearance of the radius is 0.001mm. When the scale sleeve is rotated, the volume of the rotation of the scale must be removed.

  • Model M1080B Professional and Useful Centerless Internal / Tool / Tool Cutter Grinder/internal Grinding Machine

    Model M1080B Professional and Useful Centerless Internal / Tool / Tool Cutter Grinder/internal Grinding MachineThere are three main grinding methods in the unintentional cylindrical grinder, including through, cut in and cut through, through type and centerless grinding. The workpiece is grinded along the axis of the grinding wheel. The small inclination angle of the axis of the guide wheel is adjusted to realize the axial feed of the workpiece. It is suitable for grinding slender cylindrical workpiece. The short axis of the central hole and the set of workpiece. Cut - in - type centerless grinding. There is an axial orientation fulcrum on the plate, and the workpiece is supported on a certain position of the plate and grinding with a grinding wheel or a guide wheel. It is used to grind workpiece and cone, ball or other rotary workpiece with shaft shoulder or protruding platform. It is the combination of the two. In addition, there are tangent feed grinding and the end feed grinding of the workpiece with the steps in the axial and back. The productivity of the unintentional cylindrical grinder is high. It is mostly used in mass production and is easy to automate.

  • MD2110C Internal And End Face Grinding Machine With High Productivity

    MD2110C Internal And End Face Grinding Machine With High ProductivityThis machine tool is mainly used for grinding of internal hole, stepped hole, internal tapered hole and end face of work piece. The machine tool is equipped with the jump institution, so it is not necessary to conduct the manual tool setting again after exiting the grinding wheel for measurement or modification. The start hand of the workbench is equipped with the safety interlock to ensure the security of loading, unloading and measurement. The maximum speed of revolution of the machine tool spindle is 24000rpm to improve the grinding of small holes. The machine tool is equipped with the cross grinding device which can ensure the verticality of the inner hole and end face.